Cost-Per-Mile by Truck: Finding the Money-Losers in Your Fleet

If you’re tracking fleet-wide cost-per-mile but not per-unit CPM, you’re averaging away the problem. The trucks bleeding $0.15–$0.30 more per mile than your fleet mean hide inside a blended number — and they’ll keep costing you until you surface them individually.

That’s not a small rounding error. A single tractor running $0.30/mile above your fleet average across 100,000 annual miles is $30,000 in excess cost — every year, from one truck. Multiply that across two or three underperformers in a 50-unit fleet and you’re looking at six figures in preventable spend that never shows up in any single line item.

The good news: the data to find these trucks already exists in your telematics, fuel cards, and maintenance system. The gap — almost always — is that nobody has connected those sources into a per-unit view. This post shows you exactly how to do that, what tools help, and what the math looks like when you get it right.


What “Cost-Per-Mile by Truck” Actually Means

Cost-per-mile (CPM) at the fleet level is a useful executive number. CPM at the truck level is an operational weapon.

Per-unit CPM = Total operating cost for that vehicle ÷ Miles driven in the same period

What goes into “total operating cost” per truck:
– Fuel (actual gallons × cost, not allocation)
– Scheduled maintenance (PMs, filters, fluids)
– Unscheduled repairs (breakdowns, road calls, reactive work)
– Tires (prorated by replacement events)
– Downtime cost (if you’re capturing lost revenue or utilization)
– Driver-influenced costs (idle fuel burn, hard braking wear)

Most fleets have all of this data. The problem is it lives in four different systems — Geotab or Samsara for miles and fuel, a fuel card system like Comdata for actual pump costs, a shop system or spreadsheet for repair invoices, and a tire vendor portal somewhere else entirely. Nobody rolls it up per unit.


The Benchmarks That Matter in 2026

Before you can spot a money-loser, you need a baseline. Industry CPM varies widely by fleet type, equipment age, and route profile — but here are realistic anchors:

  • Class 8 long-haul: $0.65–$0.85/mile total operating cost (ATA cost survey ranges, excluding driver wages and depreciation add another $0.40–$0.60)
  • Regional/local Class 8: $0.55–$0.75/mile
  • Medium-duty (Classes 4–6): $0.35–$0.55/mile
  • Fuel alone: Typically $0.28–$0.38/mile at current diesel prices depending on MPG and load

What’s more useful than industry benchmarks is your own internal spread. If your fleet average is $0.62/mile and three trucks are running $0.84/mile, those three are your problem — regardless of what the ATA says.

This is exactly the dynamic that shows up in real fleets. RC Willey’s fleet, when it gained visibility into per-unit costs through Link-X, found trucks where cost reduction reached $0.07 per mile saved and $21,000 per vehicle in annual savings. That’s what happens when you move from fleet-average thinking to unit-level accountability.


Why Your Telematics Dashboard Won’t Show You This

Samsara, Geotab, and Motive are excellent at what they do: real-time location, driver behavior scores, ELD compliance, and fuel efficiency reporting. All three have made meaningful moves into maintenance — Samsara and Motive now offer work orders; Geotab has maintenance scheduling and some cost tracking built in.

But there’s a structural limitation that none of them fully solve: they only know what they can see.

  • Geotab can show you fuel consumption from the ECM — but not what you paid at the pump through your Comdata card
  • Samsara can log a fault code — but not the repair invoice from your third-party shop
  • Motive can track miles — but not the tire replacement cost from your tire vendor’s portal
  • None of them aggregate across all three sources simultaneously into a single per-unit cost ledger

What you get is a siloed picture. Fuel over here. Repair costs over there. Miles in another tab. To build a real per-unit CPM, someone has to manually reconcile all of it — usually in a spreadsheet that’s already two weeks out of date by the time it’s done.

The platforms doing this reconciliation work — Fleetio, MaintainX, Whip Around, and Link-X — each take a different approach. Fleetio is strong on maintenance records and cost history per vehicle. MaintainX and Whip Around excel at inspection workflows and technician-facing tools. Link-X is specifically built as the analytics layer that ingests from all your existing sources — telematics provider, fuel cards, shop data — and produces the per-unit cost view without requiring you to switch platforms or re-enter data.


How to Actually Build Per-Unit CPM Visibility

Whether you’re doing this manually or with a platform, the process is the same:

Step 1: Establish your cost buckets
Define what you’re counting. Fuel, scheduled maintenance, unscheduled repair, tires, and downtime are the core five. Be consistent across every unit.

Step 2: Tie costs to VINs, not just work orders
Every invoice, repair event, and PM record needs to be associated with a specific vehicle ID. This is the step most fleets skip — costs get logged to a shop job number, not a truck.

Step 3: Pull miles from a single source
Use your telematics odometer data, not driver logs or fuel card odometer entries (which are often wrong). Standardize the period — 30-day rolling, quarterly, or trailing 12 months all work; just be consistent.

Step 4: Calculate and rank
Sort every unit by CPM, highest to lowest. The top 10–15% are your investigation targets.

Step 5: Diagnose the outliers
High CPM trucks usually fall into one of four buckets:
– Age/mileage: Equipment that’s past its economic life
– Chronic repair loops: Same systems failing repeatedly (often a supplier or spec issue)
– Driver behavior: High idle, hard braking, speeding — all translate to measurable cost-per-mile increases
– Route mismatch: A truck spec’d for highway running local stop-and-go, wearing out faster

Once you know which bucket, you can act — whether that’s a replace-vs-repair decision, a driver coaching conversation, or a route reassignment.


What This Looks Like With Link-X

Link-X connects to your existing Geotab, Samsara, or Motive feed alongside your fuel card data and maintenance records, then builds the per-unit cost ledger automatically. You get a ranked dashboard of every truck in your fleet by CPM — updated continuously, not monthly.

For fleets running mixed telematics (a common reality after acquisitions or organic growth), this is especially valuable. Link-X normalizes data from multiple providers into a single view, so a Geotab truck and a Samsara truck get compared on the same cost basis.

Beyond CPM ranking, Link-X surfaces the cost components driving each unit’s number — so you’re not just seeing that Unit 47 is expensive, you’re seeing that it’s $0.11/mile over average and $8,400 of that is unscheduled brake and suspension repairs in the last six months. That’s a replace-vs-repair conversation, not a coaching conversation.

Alter Metal Recycling used this kind of R&M visibility to cut repair and maintenance costs by 33%. PDM Steel runs at a $0.33/mile benchmark that their team can now defend unit by unit. Those aren’t fleet-average improvements — they came from knowing exactly which vehicles were pulling the number up.


Start With the Top 10%

You don’t need to overhaul your entire data infrastructure to start. Pull your worst 10% by estimated CPM this week — even if your estimate is rough — and start asking why those units cost more. That investigation alone will surface at least one repair loop, one aging unit past its economic life, or one driver behavior issue worth addressing.

If you want to see what your fleet’s per-unit CPM picture actually looks like — across all your telematics and cost sources in one place — connect with the Link-X team. The money-losers are in your data. The question is whether you can see them.

Link-X for your fleet

Talk to a fleet expert.

See what Link-X could save your fleet. Tell us a bit about your operation and we'll reach out.

By submitting, you agree to be contacted by Link-X. No spam.

Thanks — we'll be in touch.

A Link-X fleet expert will reach out to the email you provided.

1 / ?
Vehicles

Vehicle Inventory Management
Vehicle Groups
Subgroups

Custom Fields
Maintenance Management

Service Programs
Service Reminders
Manual Service Entries
Issue Management
Faults
Unlimited, Customizable PM Schedules

Tire Management
Warranty Management
Registration & Permit Management
Work Orders

Calendar
Custom Work Order Status
Track Labor Hours
WO & RO Tracking

Outsourced Maintenance

Maintenance Provider Network
Fully Automated Invoice Processing

Inspections

Mobile & Web Forms
Inspection Form: Vehicle Rules
Inspection Form: Items
Automated Workflows
Inspection Schedules

Collaboration

 Documents

Reporting & Analysis

Cost per Mile
Standard Reports
Total Cost of Ownership
Replacement Analysis
Customized Dashboards
Share, Save & Favorite Reports
Fleet Health and Insights
Fuel Tracking

 Integrations & API Access

Fuel Integrations
Telematics Integrations
Repair Shop Integrations
Third-Party Integrations
API Access
Fully Automated Invoice Processing

User & Vendor Management

Unlimited Users
Custom Roles
Custom Data Access

Mobile App
Equipment Management

Vehicle Linking
Issues
Documents & Photos
Location Tracking
Custom Fields
Hide or Inactivate Assets

Link-X Support

Customer Support Requests via email or phonex
Account Manager
Senior Account Manger
Quarterly Business Analysis
White Glove Consultative Support

Vehicles

Vehicle Inventory Management
Vehicle Groups
Subgroups

Custom Fields
Maintenance Management

Service Programs
Service Reminders
Manual Service Entries
Issue Management
Faults
Unlimited, Customizable PM Schedules

Tire Management
Warranty Management
Registration & Permit Management
Work Orders

Calendar
Custom Work Order Status
Track Labor Hours
WO & RO Tracking

Outsourced Maintenance

Maintenance Provider Network
Fully Automated Invoice Processing

Inspections

Mobile & Web Forms
Inspection Form: Vehicle Rules
Inspection Form: Items
Automated Workflows
Inspection Schedules

Collaboration

 Documents

Reporting & Analysis

Cost per Mile
Standard Reports
Total Cost of Ownership
Replacement Analysis
Customized Dashboards
Share, Save & Favorite Reports
Fleet Health and Insights
Fuel Tracking

 Integrations & API Access

Fuel Integrations
Telematics Integrations
Repair Shop Integrations
Third-Party Integrations
API Access
Fully Automated Invoice Processing

User & Vendor Management

Unlimited Users
Custom Roles
Custom Data Access

Mobile App
Equipment Management

Vehicle Linking
Issues
Documents & Photos
Location Tracking
Custom Fields
Hide or Inactivate Assets

Link-X Support

Customer Support Requests via email or phonex
Account Manager

What You’re Missing Out On

  • Senior Account Manger
  • Quarterly Business Analysis
  • White Glove Consultative Support
Vehicles

Vehicle Inventory Management
Vehicle Groups
Subgroups

Custom Fields
Maintenance Management

Service Programs
Service Reminders
Manual Service Entries
Issue Management
Faults
Unlimited, Customizable PM Schedules

Tire Management
Warranty Management
Registration & Permit Management
Work Orders

Calendar
Custom Work Order Status
Track Labor Hours
WO & RO Tracking

Outsourced Maintenance

Maintenance Provider Network
Fully Automated Invoice Processing

Inspections

Mobile & Web Forms
Inspection Form: Vehicle Rules
Inspection Form: Items
Automated Workflows
Inspection Schedules

Collaboration

 Documents

Reporting & Analysis

Cost per Mile
Standard Reports
Total Cost of Ownership
Replacement Analysis
Customized Dashboards
Share, Save & Favorite Reports
Fleet Health and Insights
Fuel Tracking

User & Vendor Management

Unlimited Users
Custom Roles
Custom Data Access

Mobile App
Equipment Management

Vehicle Linking
Issues
Documents & Photos
Location Tracking
Custom Fields
Hide or Inactivate Assets

Link-X Support

Customer Support Requests via email or phonex

What You’re Missing Out On

  • Fuel Integrations
  • Telematics Integrations
  • Repair Shop Integrations
  • Third-Party Integrations
  • API Access
  • Fully Automated Invoice Processing
  • Account Manager

Insights for Decisions

Link-X helps you make the right purchase or lease decisions by showing whether it's more cost-effective to lease or buy vehicles for your fleet.

Improve Visibility & Accountability

Reduce OPEX by automating tasks, optimizing headcount, and ensuring proper maintenance to minimize breakdowns and repair costs. It also extends asset life and cuts expenses by directing spending to the best vendors, saving up to $4,000 per fleet annually.

Reduce Operating Expenses

RLink-X increases efficiency by optimizing fleet size to lower expenses and improving overall uptime. It reduces time spent on repairs and maintenance by using data to guide asset replacements, and avoids extra repair costs, boosting revenue.

Increase Efficiency

Reduce OPEX by automating tasks, optimizing headcount, and ensuring proper maintenance to minimize breakdowns and repair costs. It also extends asset life and cuts expenses by directing spending to the best vendors, saving up to $4,000 per fleet annually.