Tracking total equipment cost in a landscaping fleet means accounting for every truck, trailer, and piece of powered equipment — not just the vehicles with a VIN. When you ignore trailers and mowers, you’re flying blind on 30–50% of your actual operating cost.
Most landscaping operations have a handle on their trucks. Oil changes are scheduled, DOT inspections happen, and someone is at least watching fuel spend. But the 16-foot trailer behind that truck? The zero-turn that runs 600 hours a season? Those assets quietly drain budget while nobody’s tracking their repair history, cost-per-hour, or replacement threshold. That’s where landscaping fleets leave real money on the table.
The fix isn’t buying more telematics boxes — it’s pulling every asset into one maintenance and cost framework. Here’s how to do it, what tools fit, and where the numbers should land.
Why “Just Track the Trucks” Is a Losing Strategy
Your trucks are probably your most visible cost center, but they’re rarely where your highest rate of unplanned spend hides.
Consider the math on a mid-size landscaping operation running 20 trucks, 20 trailers, and 40 mowers:
- Trucks at $0.18–$0.28/mile in R&M costs are well-documented and relatively predictable.
- Trailers average $1,200–$2,500/year in maintenance when managed proactively — but deferred maintenance on brakes, lighting, and tires can push a single breakdown event past $4,000 when you factor in roadside service, fines, and job delays.
- Powered equipment (mowers, blowers, aerators) often carries zero maintenance records. Industry averages suggest commercial mowers cost $0.15–$0.35 per operating hour in consumables and repairs alone — and that number climbs sharply when PM is skipped.
Add it up and an untracked trailer or mower fleet can represent $80,000–$150,000 in annual spend that’s invisible in your reporting. That’s not a small rounding error.
The Three Asset Categories You Need to Track Separately
1. Trucks and Service Vehicles
This is the layer most fleet software handles well. You want:
- Preventive maintenance schedules tied to odometer or engine hours
- Cost-per-mile tracking broken down by vehicle, not just fleet-wide
- Work order history that travels with the asset, not with a technician’s memory
- DVIR compliance — especially important if you’re crossing state lines or running DOT-regulated weight classes
A benchmark worth knowing: Alter Metal Recycling cut R&M costs by 33% after implementing systematic PM tracking and work order discipline across their fleet. That’s not a software miracle — it’s what happens when every repair is logged, every PM is enforced, and cost outliers get caught early.
2. Trailers
Trailers are the most under-managed asset class in landscaping. They don’t have engine hours, they often don’t have GPS, and they get swapped between trucks constantly — which means nobody “owns” the maintenance.
What you actually need to track per trailer:
- Brake and lighting inspections on a time or mileage interval (every 10,000 miles or annually at minimum)
- Tire condition and tread depth — trailer tires are often the last thing checked and the first thing that causes a roadside event
- Coupler and hitch wear, ramp/gate hardware, floor condition
- Repair cost history by unit so you can make a real replace-vs-repair decision before a trailer becomes a liability
The DOT side matters too. Defective trailer lighting and brake violations average $1,000–$2,500 per citation at roadside inspections, and repeat violations drive up your CSA score. A simple inspection form completed before each deployment catches 80% of those issues for free.
3. Powered Equipment (Mowers, Blowers, Skids, Aerators)
This is where most landscaping fleets have zero data. Maintenance is ad-hoc, repairs are expensed without being tied to a specific unit, and replacement decisions are made on feel rather than numbers.
Track these metrics per unit:
- Operating hours (most commercial mowers have an hour meter — use it)
- Cost per operating hour = (all repairs + consumables + depreciation) ÷ total hours run
- PM intervals by hours — blade sharpening every 25 hours, oil every 50–100 hours, belts and blades seasonally
- Downtime events — if a mower misses a job, that lost revenue should attach to the asset record
When you start pulling this data, you’ll find that two units of the same make and model often have wildly different cost profiles. One might run $0.18/hour; another $0.47/hour. That spread tells you which unit to prioritize for replacement and which crews are driving equipment harder.
How the Tooling Landscape Looks in 2026
You have several software options, and the right fit depends on how much of your fleet is telematics-connected versus tracked manually.
Whip Around and Fleetio are strong choices for inspection-focused workflows. Whip Around in particular has a clean mobile DVIR and inspection flow that field crews actually use — and both handle trailers and equipment alongside trucks reasonably well. Fleetio’s PM scheduling and work orders are well-regarded for mid-size fleets.
MaintainX is worth evaluating if your shop is managing mowers and equipment alongside vehicles — it handles work orders and PM for non-vehicle assets cleanly, and the mobile interface is solid for technicians in the field.
Samsara and Motive have expanded well beyond GPS into work orders, driver documents, and even some cost-per-mile reporting. If you’re already running their telematics, their native maintenance features are a reasonable starting point for truck-level data. The limitation is that neither is built to track non-connected assets like trailers without a tag/sensor add-on, and cost-per-hour reporting for powered equipment is essentially nonexistent in their standard dashboards.
Geotab has the deepest integration ecosystem and can handle multi-asset environments, but it typically requires partner software or custom reporting to get meaningful R&M cost analytics rather than raw telematics data.
Link-X sits in a different position: it’s an analytics and maintenance management layer designed to aggregate data from your existing telematics (Geotab, Samsara, Motive), fuel cards, and repair records — including assets that don’t have a telematics device. For landscaping fleets running mixed-brand equipment across trucks, trailers, and mowers, that “one view” of cost across every asset class is the core use case. Fleet customers using Link-X have surfaced benchmarks like RC Willey saving $0.07 per mile and $21,000 per vehicle after getting standardized cost visibility across their mixed fleet — the kind of number that changes budget conversations.
If you’re already paying for Samsara on your trucks, Link-X doesn’t replace it. It reads the data from Samsara and layers in the trailer inspections, mower PM records, and work orders so your total fleet cost lives in one place.
Building Your Cost View: A Practical Starting Point
You don’t need perfect software to start. Here’s a minimum viable tracking setup:
- List every asset — truck, trailer, mower, blower, skid. Assign each a unit number.
- Create a PM schedule per asset class — even a spreadsheet beats nothing.
- Log every repair cost to a specific unit — stop expensing repairs to a general “equipment” GL code.
- Set a cost-per-hour or cost-per-mile threshold that triggers a replace-vs-repair review (a common rule: when annual repair cost exceeds 25–30% of replacement value, it’s time to evaluate).
- Run a quarterly asset cost report — rank every unit by total spend. The top 10% will tell you where to focus.
Once you have that baseline, adding software to automate the scheduling, capture inspection data from the field, and flag cost outliers becomes a force multiplier rather than a dependency.
One View Changes the Decision
The landscaping companies that manage equipment cost best aren’t necessarily running the newest machines or the biggest fleets. They’re the ones who know their cost-per-hour on every mower, enforce PM on every trailer, and can tell you in 60 seconds which three units in the fleet are dragging their margins.
That visibility starts with treating trailers and powered equipment like the real assets they are — not afterthoughts behind the truck.
If you want to see what a unified cost view looks like across your entire equipment mix, reach out to the Link-X team and walk through what your current data sources could power.
Talk to a fleet expert.
See what Link-X could save your fleet. Tell us a bit about your operation and we'll reach out.
Thanks — we'll be in touch.
A Link-X fleet expert will reach out to the email you provided.
