Your Telematics Data Is Siloed — Here’s How to Fix It

Your telematics data is siloed because each vendor — Samsara, Geotab, Motive — stores data in its own platform, and none of them are designed to talk to each other. That fragmentation is costing you money you can’t see.

Most mid-to-large fleets don’t run a single telematics brand. They’ve grown through acquisitions, expanded into new regions, or inherited equipment from a predecessor company. The result: your Samsara dashboard shows utilization for 40 trucks in the Southeast, your Geotab portal shows fault codes for the Midwest fleet, and nobody has a single number for cost-per-mile across the whole operation. You’re not managing a fleet — you’re managing three spreadsheets that don’t agree.

The fix isn’t ripping out your hardware. It’s adding an analytics layer that sits above all of it.


Why Single-Vendor Telematics Platforms Can’t Solve This

Samsara, Geotab, and Motive are excellent at what they do — real-time GPS, driver behavior scoring, Hours of Service compliance, fault code detection. These are mature, well-supported platforms, and there’s a reason fleets invest heavily in them.

But their reporting is designed around their own data. Here’s what that means in practice:

  • Samsara gives you rich utilization and safety data for Samsara-connected assets. It doesn’t ingest Geotab fault history or Motive fuel card data from a different division.
  • Geotab has powerful custom reporting, but its MyGeotab environment is built to surface Geotab telemetry. Cross-vendor rollups require custom API work your team probably doesn’t have time to build.
  • Motive (formerly KeepTruckin) has added maintenance features and cost-per-mile tracking in recent releases — but again, those numbers are only as complete as the assets on the Motive network.

The gap isn’t a flaw in any one platform. It’s structural: a telematics vendor’s job is to manage its own sensor network. Cross-fleet normalization is a different problem entirely.


What “Trapped Data” Actually Costs You

When your data lives in separate silos, the financial damage is specific and measurable.

You can’t calculate true cost-per-mile. CPM is only meaningful when it captures fuel, labor, maintenance, tires, and depreciation across every asset — not just the ones on one telematics platform. If your Samsara fleet looks cheaper to operate than your Geotab fleet, is that real, or is it because you’re not capturing the same data points for both?

Underutilization hides in the gaps. Sunrun, a residential energy services company, worked with Link-X and identified 376 underutilized vehicles representing $16.9M in trapped asset value. That kind of finding requires comparing utilization data across the whole fleet against actual job demand — something a single-vendor dashboard can’t surface when only half the fleet is reporting into it.

Repair costs spike without cross-fleet visibility. When a maintenance event on one asset isn’t visible to the team managing a parallel fleet, PMs get missed, faults go unacted on, and reactive repair costs — which run 3–9x higher than planned maintenance — compound quietly.

Replace-vs-repair decisions become guesswork. Making a sound fleet replacement decision requires total cost of ownership data: acquisition, maintenance history, downtime, fuel, and residual value. If that data lives in three different portals, you’re making a six-figure capital decision on incomplete information.


The Comparison Problem: Fleetio and MaintainX in the Mix

If you’re evaluating maintenance management tools alongside your telematics stack, Fleetio and MaintainX are two names you’ll encounter frequently — and both are strong platforms worth considering.

Fleetio integrates with Geotab, Samsara, and Motive via API, pulling in fault codes and mileage to trigger PM schedules. It’s a solid choice for fleets that want a dedicated CMMS on top of a primary telematics provider. Where it has less depth: cross-vendor normalization when you have assets split across multiple telematics platforms, and analytics that go beyond maintenance into full fleet cost-per-mile and TCO modeling.

MaintainX is a broader CMMS platform with strong work order management and mobile-first workflows. It’s not built specifically for fleet, which means fuel card integration, DVIR workflows, and telematics-driven PM triggers require more configuration effort.

Link-X is a different kind of tool. It’s not competing with your telematics hardware — it connects to Geotab, Samsara, Motive, and fuel card systems like Comdata simultaneously, normalizes the data across vendors, and surfaces fleet-wide analytics: cost-per-mile, TCO, utilization, and maintenance cost benchmarks, all in one dashboard. For fleets running mixed telematics environments, that’s the structural difference.


What Cross-Telematics Analytics Actually Looks Like

When you pull all your telematics sources into a single normalized layer, the reporting capabilities change meaningfully:

Fleet-Wide Cost-Per-Mile Benchmarking

You can compare CPM across asset types, regions, and even telematics brands — apples to apples. RC Willey, a home furnishings delivery fleet, saved $0.07 per mile after surfacing cost patterns that weren’t visible inside their legacy reporting setup. That figure compounds fast across a large fleet.

PM Scheduling Across All Assets

Preventive maintenance schedules should be driven by actual mileage and engine hours — not by which telematics system the truck is on. A unified layer reads those signals from any connected source and triggers work orders consistently.

Utilization Analysis Across the Whole Fleet

You can’t right-size your fleet if you’re only looking at half of it. Cross-vendor utilization reports let you identify idle assets, over-deployed assets, and opportunities to redeploy before you sign a new lease.

Automated Invoice Processing and Warranty Tracking

Repair invoices don’t care which telematics brand is on the truck. A maintenance management layer that ingests invoices from any vendor or shop, matches them against warranty records, and flags recoverable costs closes a gap that neither Samsara nor Geotab was designed to close.


How to Start Pulling Your Data Together

You don’t need a wholesale technology overhaul to break out of silos. Here’s a practical starting point:

  1. Audit your current data sources. List every telematics platform, fuel card system, and maintenance tool generating data about your fleet. Most operations have four to six disconnected sources.
  2. Identify your highest-value gap. Is it CPM visibility? Utilization? PM compliance across locations? Prioritize the gap with the biggest dollar impact first.
  3. Map what integration exists today. Check whether your telematics platforms expose API access — Geotab’s MyGeotab, Samsara’s API, and Motive all do. The question is whether you have a downstream system actually consuming and normalizing that data.
  4. Don’t duplicate your telematics investment. You don’t need to standardize on one hardware vendor. You need an analytics layer above the hardware that treats all sources equally.
  5. Set baseline metrics before you change anything. CPM by asset class, PM compliance rate, and reactive-vs-planned repair ratio are three numbers worth locking in now so you can measure improvement.

What Link-X Does Here

Link-X connects to your existing telematics platforms — Geotab, Samsara, Motive — alongside fuel card data and repair invoices, and normalizes everything into one fleet-health dashboard. That means cost-per-mile calculations that actually include all your assets, PM schedules that fire based on real engine hours regardless of which hardware is tracking them, and replace-vs-repair analysis built on complete TCO data.

Alter Metal Recycling reduced repair and maintenance costs by 33% after implementing Link-X across their mixed fleet environment. PDM Steel runs at $0.33 per mile with full visibility into where that number comes from. Those results come from having the full picture — not three partial ones.


If you’re running a multi-vendor telematics environment and your reporting still lives in separate portals, you’re making decisions on incomplete data. See what Link-X can surface about your fleet at link-x.com/contact/.

Link-X for your fleet

Talk to a fleet expert.

See what Link-X could save your fleet. Tell us a bit about your operation and we'll reach out.

By submitting, you agree to be contacted by Link-X. No spam.

Thanks — we'll be in touch.

A Link-X fleet expert will reach out to the email you provided.

1 / ?
Vehicles

Vehicle Inventory Management
Vehicle Groups
Subgroups

Custom Fields
Maintenance Management

Service Programs
Service Reminders
Manual Service Entries
Issue Management
Faults
Unlimited, Customizable PM Schedules

Tire Management
Warranty Management
Registration & Permit Management
Work Orders

Calendar
Custom Work Order Status
Track Labor Hours
WO & RO Tracking

Outsourced Maintenance

Maintenance Provider Network
Fully Automated Invoice Processing

Inspections

Mobile & Web Forms
Inspection Form: Vehicle Rules
Inspection Form: Items
Automated Workflows
Inspection Schedules

Collaboration

 Documents

Reporting & Analysis

Cost per Mile
Standard Reports
Total Cost of Ownership
Replacement Analysis
Customized Dashboards
Share, Save & Favorite Reports
Fleet Health and Insights
Fuel Tracking

 Integrations & API Access

Fuel Integrations
Telematics Integrations
Repair Shop Integrations
Third-Party Integrations
API Access
Fully Automated Invoice Processing

User & Vendor Management

Unlimited Users
Custom Roles
Custom Data Access

Mobile App
Equipment Management

Vehicle Linking
Issues
Documents & Photos
Location Tracking
Custom Fields
Hide or Inactivate Assets

Link-X Support

Customer Support Requests via email or phonex
Account Manager
Senior Account Manger
Quarterly Business Analysis
White Glove Consultative Support

Vehicles

Vehicle Inventory Management
Vehicle Groups
Subgroups

Custom Fields
Maintenance Management

Service Programs
Service Reminders
Manual Service Entries
Issue Management
Faults
Unlimited, Customizable PM Schedules

Tire Management
Warranty Management
Registration & Permit Management
Work Orders

Calendar
Custom Work Order Status
Track Labor Hours
WO & RO Tracking

Outsourced Maintenance

Maintenance Provider Network
Fully Automated Invoice Processing

Inspections

Mobile & Web Forms
Inspection Form: Vehicle Rules
Inspection Form: Items
Automated Workflows
Inspection Schedules

Collaboration

 Documents

Reporting & Analysis

Cost per Mile
Standard Reports
Total Cost of Ownership
Replacement Analysis
Customized Dashboards
Share, Save & Favorite Reports
Fleet Health and Insights
Fuel Tracking

 Integrations & API Access

Fuel Integrations
Telematics Integrations
Repair Shop Integrations
Third-Party Integrations
API Access
Fully Automated Invoice Processing

User & Vendor Management

Unlimited Users
Custom Roles
Custom Data Access

Mobile App
Equipment Management

Vehicle Linking
Issues
Documents & Photos
Location Tracking
Custom Fields
Hide or Inactivate Assets

Link-X Support

Customer Support Requests via email or phonex
Account Manager

What You’re Missing Out On

  • Senior Account Manger
  • Quarterly Business Analysis
  • White Glove Consultative Support
Vehicles

Vehicle Inventory Management
Vehicle Groups
Subgroups

Custom Fields
Maintenance Management

Service Programs
Service Reminders
Manual Service Entries
Issue Management
Faults
Unlimited, Customizable PM Schedules

Tire Management
Warranty Management
Registration & Permit Management
Work Orders

Calendar
Custom Work Order Status
Track Labor Hours
WO & RO Tracking

Outsourced Maintenance

Maintenance Provider Network
Fully Automated Invoice Processing

Inspections

Mobile & Web Forms
Inspection Form: Vehicle Rules
Inspection Form: Items
Automated Workflows
Inspection Schedules

Collaboration

 Documents

Reporting & Analysis

Cost per Mile
Standard Reports
Total Cost of Ownership
Replacement Analysis
Customized Dashboards
Share, Save & Favorite Reports
Fleet Health and Insights
Fuel Tracking

User & Vendor Management

Unlimited Users
Custom Roles
Custom Data Access

Mobile App
Equipment Management

Vehicle Linking
Issues
Documents & Photos
Location Tracking
Custom Fields
Hide or Inactivate Assets

Link-X Support

Customer Support Requests via email or phonex

What You’re Missing Out On

  • Fuel Integrations
  • Telematics Integrations
  • Repair Shop Integrations
  • Third-Party Integrations
  • API Access
  • Fully Automated Invoice Processing
  • Account Manager

Insights for Decisions

Link-X helps you make the right purchase or lease decisions by showing whether it's more cost-effective to lease or buy vehicles for your fleet.

Improve Visibility & Accountability

Reduce OPEX by automating tasks, optimizing headcount, and ensuring proper maintenance to minimize breakdowns and repair costs. It also extends asset life and cuts expenses by directing spending to the best vendors, saving up to $4,000 per fleet annually.

Reduce Operating Expenses

RLink-X increases efficiency by optimizing fleet size to lower expenses and improving overall uptime. It reduces time spent on repairs and maintenance by using data to guide asset replacements, and avoids extra repair costs, boosting revenue.

Increase Efficiency

Reduce OPEX by automating tasks, optimizing headcount, and ensuring proper maintenance to minimize breakdowns and repair costs. It also extends asset life and cuts expenses by directing spending to the best vendors, saving up to $4,000 per fleet annually.